Hurst Chrome Shifter Stick Handle #4077 16" tall curved bench seats street rods

Description

Hurst chrome shifter stick #
4077
:
15.5" tall, curves 5" rearward & offsets 0.5" RIGHT
3/8"-16 knob threads
Forged mild steel - case-hardened for toughness, chrome-plated for beauty
"HURST" imprinted on both sides in mid-section
Mating serrations
for Hurst stub mount are
stamped into left side
WARNING: Do not weld, bend, or modify a case-hardened part like this
as it will create a weak spot that can lead to catastrophic failure
Great for custom installations -
measure before you buy!
Mounts via
3/8" bolt holes spaced 7/8" apart
- fits any aftermarket Hurst stub
Mix parts carefully as
proper leverage ratio (throw length) requires matching stick length to stub fulcrum height
Stick length = 16.3"
(distance from mount to knob) - see swap bases for fulcrum options
Genuine Hurst part without pkg
IF YOU ARE DOING A SWAP - application info is irrelevant once transmission is changed
- sit in vehicle with tape measure while studying
Hurst catalog - stick section
.
This stick is used by the following external linkage Hurst shifters
for OE 4 speed transmissions - correct fitment requires the specified Hurst base & installation kit
(see
Hurst catalog)
:
3916788 for Mopar C-body (full size)
w/o console
(requires base 3914076):
1964-1967 Chrysler 300, New Yorker, Newport, Town & Country
1964-1969 Dodge Monaco & Polara
1964-1969 Plymouth Fury
Probably fits 4 speed conversions of this platform thru 1973
Note models w/ console use a different stick
(# 4084 sold elsewhere)
NOTE: These part numbers may be specific to the transmission, engine, or interior trim (console etc) and may not fit all models mentioned.
Intended for aftermarket Hurst shifters - most OE factory shifters from this era (including Hurst) are NOT compatible with a bolt-on stick; they use a different connection.
This stick is also used by the following Hurst & Core internal rail shifters as an option for trucks w/ body lifts -
matching base required, not compatible with stock shifters
(see separate listings for complete kits):
(kits that normally use stick # 0085 or 0090 = Jeep Wrangler YJ & Chevy S10)
3910033 for 1982-1995 S10 pickup w/ T5
3915040 for 1989-1995 Jeep Wrangler YJ w/ AX-15
3915043 for 1987-1995 Jeep Wrangler YJ w/ AX-5
This stick is also great for custom swaps using a Core Shifters swap base that need a high knob location - street rods, trucks, Jeeps, etc.