Intex 28684 Pool-Heater Electric Pool 3kw for swimming pool + thermometer 220V

Description

Intex 28684
water heater for the pool, perfect to enjoy it even outside the hottest months of the year thanks to its innovative low energy consumption able to warm up the water to 35°.
Power 220-240V, 125W
(If you have only 110V Then you just need to buy "110V to 220V Voltage Converter"  (it is inexpensive))
Compatible with all pools that have a pump.
DELIVERED WITH A
EUROPEAN RCD SAFETY PLUG.
Heater exceeds European safety standards (TUV and CE approved)
As the largest worldwide manufacturer of above-ground pools, Intex now conquers the market with this easy to use, inexpensive and efficient electric swimming pool heater. This heater is suitable for pools up to 457 cm in diameter and heats the water to a maximum of 35°C. You can use the Intex electric heater as additional heating for larger pools. The temperature of a pool of 1 m³ rises ± 3°C per hour with this heater.
This heater pump for the pool by Intex is a most innovative pool accessory that will warm up the water of your pool to 35° in just a short time. In case you already own a solar heater Intex 28685 this can be easily combined for added power.
This Intex 28684 is able to warm up the water by 0.25° per hour in a 10 m2 pool.
Easy to install and designed to save time and energy with its innovative internal heating system.
How to install:
1. Place the heater next to the filter pump
2. Attach it and press the reset button
3. The pool will start tho heat up
4. The heating has 32 mm connections and you simply plug it in the mains (220-240 V).
Safety instructions:
The built in safety systems make this heater durable over the years
A sensor avoid turning on the heater when the water is too low
A safety lock interrupts power supply when electronical issues arise
A thermostat protects the heater from overheating
A sensor turns off the heater when a fall is detected
Accessories included:
3 KW heating with RCD plug
One 155 cm connection hose with 32 mm diameter
Thermometer
Thermostat
Ring strains
Characteristics:
It is connected in series after the filter pump with a capacity from 2006 to 3785 l / h.
The pool water temperature should be between 17 and 35 ° C.
Equipped with RCD (electric shock protection system), thermostat and water level indicator.
Voltage - 220V.
Power - 3 kW (15A socket required).
Hose connection hole diameter: 32 mm.
Weight - 3.7 kg.