-40%
MT5 to 5C Collet Sleeve w/Draw Tube Pilot
MT5 to 5C Collet Sleeve w/Draw Tube Pilot

MT5 to 5C Collet Sleeve w/Draw Tube Pilot

$ 52.8

Availability: 100 in stock
  • MPN: Does Not Apply
  • Collet Chuck Type: 5C Collet Chuck
  • All returns accepted: ReturnsNotAccepted
  • Condition: Used
  • Shank Type: Taper Shank
  • Brand: Unbranded/Generic

    Description

    MT5 to 5C Collet Sleeve w/draw tube pilot will fit lathe spindles that accept the Morse #5 taper. In good condition.
    Please measure your spindle before bidding. A Morse #5 taper has a gage line of 1.748", that is the size that your spindle needs to be for this Collet Sleeve to work. Below I have listed the various Morse Tapers and their maximum diameter, if the opening to your spindle is not within a few thousands of 1.748" then do not bid on this sleeve because it will not fit and function correctly. You should also check your spindle's bore diameter. The through bore on your spindle should be around 1.5" for the sleeve to seat.
    Taper   Large End
    #0
    0.3561"
    #1
    0.4750"
    #2
    0.7000"
    #3
    0.9380"
    #4
    1.2310"
    #4-1/2  1.5000"
    #5
    1.7480"
    #6
    2.4940"
    #7
    3.270"